What’s the name of that white thing when we align the blade?
josdebosssson February 19, 2021 at 9:33 pm
In which position the moving blade needs to be for aligning the blades? I think its very strange that no toturial is mentioning this (even the original wahl)
NJA 3on February 19, 2021 at 9:33 pm
Why the heck are my clippers not cutting hair? I took it apart, nothings broke. Could it be the alignment? Itβs not even catching or pulling hair, nothing.
Nicole Mcgillon February 19, 2021 at 9:34 pm
Thank you so much. No I can cut my son’s hair.
Arpan Gauravon February 19, 2021 at 9:35 pm
Hello , each time I start my newly bought wahl clippers, it makes a ‘tuck’ noise just after I turn the switch on and before the blades start.
Do u have any suggestions as to how I should go forward with this???
Eric's fishing adventureson February 19, 2021 at 9:35 pm
I have a dumb question . I don’t understand the part about the gap. There is supposed to be an 8mm gap between what? What are you measuring at 2:15?
simos kelpetzidison February 19, 2021 at 9:37 pm
giofilms
K Bon February 19, 2021 at 9:39 pm
Thank you β€οΈ
mohamed avdolon February 19, 2021 at 9:40 pm
Fuck yes same modelπππ
Pls help how do i put the SPRING BACK
Gourav Sidhuon February 19, 2021 at 9:40 pm
Thanks buddy πππ
planecrazyishon February 19, 2021 at 9:42 pm
Thanks buddy. Followed the steps exactly, all 100% , clippers are working great again.
Uriah SKon February 19, 2021 at 9:42 pm
Thank you. I was in the middle of cutting my own hair when the smaller blade dropped out and to the floor. This was helpful.
Alexandra Stevenson February 19, 2021 at 9:42 pm
I have a wahl precision first off I removed the blades to clean it, after putting it back together it now chatters loudly And it’s not cutting, I have no screw on the side to turn it down, Have I broken them π
Alicia Hacketton February 19, 2021 at 9:43 pm
Very helpful and to the point.
BastardKittyon February 19, 2021 at 9:44 pm
Thank you so much! This is the first video I found that actually helped me. Now I can finally cut my dogβs hair again. Heβs a Komondor…lots of hair π
Private Nameon February 19, 2021 at 9:45 pm
Dang, he didn’t show the part I wanted to see, the ACTUAL putting of it back together!
Victor Sandovalon February 19, 2021 at 9:46 pm
Thank you for this video
Blaqwolf_Yaydiamond Moonon February 19, 2021 at 9:47 pm
Go to @_the_real yt page .. he do it way better and do half ass show you shyt .. stop acting like this a good tutorial!!! Fake ass dummies π―
Im really strugglin with the black screw. I do everything same as you but at the end when its all done. Its loud, then i make it quiet same as ypu, but then the upper knives are too "right – >" positioned. Then when i cut hair i notice is not as good as it was before. Please help
Kate Psson February 19, 2021 at 9:52 pm
My LIKE was going to number 666 π± So just consider my comment the like!! ππππ
sam milliganon February 19, 2021 at 9:54 pm
Thank you, an absolutely great video, very well explained and presented, I dropped my Wahl recently (oops!) and was not cutting and now thanks to you and this video, it is working perfectly again
Thanks again
Take care
Sam
Rajesh Mishraon February 19, 2021 at 10:00 pm
Was frustated with the settings. Excellent π
dwaipayan sarkaron February 19, 2021 at 10:01 pm
Do you have corded hair clipper of this pro series ,kindly share the link for indian users ?i want to buy it asap ? is the clipper both both bear and hair or we need to buy separately ?
batkovan_youtubeon February 19, 2021 at 10:05 pm
Donβt do this ! β> i decided to go all out and mirror polished the back side of the two blades – 2k, 4k, 8k, 12k gritt shapton water stones – BUT the back sides were so smooth that they were like sticking to each other and did not move freely and my clipper went dead silent and wouldnβt cut hair. Luckily i went back to the stones and decided to go 120 gritt to ruff it a bit and now the blades moves like it should – happy now.
Daniel Dominguezon February 19, 2021 at 10:05 pm
Do they sell the blades separately?
Philip Ampofoon February 19, 2021 at 10:06 pm
Sorry im confused- so i bought a Wahl balder 3 or 4 years back but never used it because of the loud noise. I fished out again during lockdown. Do I need to a) adjust the blades as shown 2) change the black adjustment screw 3) both. If I make it quiet by adjusting the screw, will that affect the cut? Thanks!
Vighnesh Bhaton February 19, 2021 at 10:07 pm
pokemon ruler
froiyion February 19, 2021 at 10:08 pm
Nice video. Very easy to understand and helped in aligning the razor. Thanks
rsrideron February 19, 2021 at 10:10 pm
Thank you.
Lenny Cruzon February 19, 2021 at 10:11 pm
My wahl 2110 blade wont slide if I tighten the 2 screws pls help sir πͺπͺπͺπͺ
Blaqwolf_Yaydiamond Moonon February 19, 2021 at 10:11 pm
You didnβt show how to put the blades back on !!! F*** everybody who said this a good video βΌοΈπ―π―π― half ass tutorial
Ed Gon February 19, 2021 at 10:14 pm
Thank you for uploading this tutorial ππΌ
Randle Bondon February 19, 2021 at 10:15 pm
Literally saved my clippers from being thrown out in frustration! With hairdressers closed in Melbourne under covid-19, I’ve become the family hair dresser. These are now going strong 17 years since purchase with no sharpening! 7 of those years were hopeless until I found your video ππ»
Arcticanon February 19, 2021 at 10:17 pm
great, thanks
tuleboxon February 19, 2021 at 10:20 pm
Many so-called "zero gap" videos on Youtube ignore aligning the leftmost teeth. Are these people ignorant, or do they just don’t care?
D Hon February 19, 2021 at 10:20 pm
Very helpful video!!
Joel Willemson February 19, 2021 at 10:21 pm
Simplest and most useful Wahl razor adjusting video on youtube. Thanks!
Chris Phillipson February 19, 2021 at 10:21 pm
Thank you for your great video. That helped me put my clippers back together after the screws fell out!
Lado Yugusukon February 19, 2021 at 10:22 pm
I dropped my clippers and they started having this really annoying noise. Just found out that it had messed up with the power setting when I dropped it. Thanks for the video!
Brandon Garlandon February 19, 2021 at 10:23 pm
Thanks man
Rana Zeeshanon February 19, 2021 at 10:25 pm
Bahi mujey Model no send kaey
The Karyendrason February 19, 2021 at 10:26 pm
thanx’s a lot. your video makes my WAHL useful again
MORIMAon February 19, 2021 at 10:26 pm
bravo!
VAB.984. Ion February 19, 2021 at 10:26 pm
Thx bro it really help me lot
Luke kokon February 19, 2021 at 10:27 pm
Thanks, that power adjust was just what solved my issue.
Hayleys family farmon February 19, 2021 at 10:28 pm
Thank you!
ANO Caron February 19, 2021 at 10:29 pm
hello, you have not shown how you tighten the screws, I think it is the most important, I have a wahl mower, the blades do not move and it makes a monster noise (even by adjusting the black screw), the blades do not want to move because I live too hard maybe, but if I do not screw enough, the upper blade moves. I do not understand . for a clipper at 100 euros, it hurts my heart, I cut my children’s hair for 6 months with a clipper at 8 euros which works perfectly and which does not require any adjustment
lol
All of these tips I learnt from Wahl website.
What’s the name of that white thing when we align the blade?
In which position the moving blade needs to be for aligning the blades? I think its very strange that no toturial is mentioning this (even the original wahl)
Why the heck are my clippers not cutting hair? I took it apart, nothings broke. Could it be the alignment? Itβs not even catching or pulling hair, nothing.
Thank you so much. No I can cut my son’s hair.
Hello , each time I start my newly bought wahl clippers, it makes a ‘tuck’ noise just after I turn the switch on and before the blades start.
Do u have any suggestions as to how I should go forward with this???
Left a like just because it was very helpful and you used a PokΓ©mon ruler lol.
I have a dumb question . I don’t understand the part about the gap. There is supposed to be an 8mm gap between what? What are you measuring at 2:15?
giofilms
Thank you β€οΈ
Fuck yes same modelπππ
Pls help how do i put the SPRING BACK
Thanks buddy πππ
Thanks buddy. Followed the steps exactly, all 100% , clippers are working great again.
Thank you. I was in the middle of cutting my own hair when the smaller blade dropped out and to the floor. This was helpful.
I have a wahl precision first off I removed the blades to clean it, after putting it back together it now chatters loudly And it’s not cutting, I have no screw on the side to turn it down, Have I broken them π
Very helpful and to the point.
Thank you so much! This is the first video I found that actually helped me. Now I can finally cut my dogβs hair again. Heβs a Komondor…lots of hair π
Dang, he didn’t show the part I wanted to see, the ACTUAL putting of it back together!
Thank you for this video
Go to @_the_real yt page .. he do it way better and do half ass show you shyt .. stop acting like this a good tutorial!!! Fake ass dummies π―
hahaha took him seriously until i saw the PokΓ©mon ruler
Im really strugglin with the black screw. I do everything same as you but at the end when its all done. Its loud, then i make it quiet same as ypu, but then the upper knives are too "right – >" positioned. Then when i cut hair i notice is not as good as it was before. Please help
My LIKE was going to number 666 π± So just consider my comment the like!! ππππ
Thank you, an absolutely great video, very well explained and presented, I dropped my Wahl recently (oops!) and was not cutting and now thanks to you and this video, it is working perfectly again
Thanks again
Take care
Sam
Was frustated with the settings. Excellent π
Do you have corded hair clipper of this pro series ,kindly share the link for indian users ?i want to buy it asap ? is the clipper both both bear and hair or we need to buy separately ?
Donβt do this ! β> i decided to go all out and mirror polished the back side of the two blades – 2k, 4k, 8k, 12k gritt shapton water stones – BUT the back sides were so smooth that they were like sticking to each other and did not move freely and my clipper went dead silent and wouldnβt cut hair. Luckily i went back to the stones and decided to go 120 gritt to ruff it a bit and now the blades moves like it should – happy now.
Do they sell the blades separately?
Sorry im confused- so i bought a Wahl balder 3 or 4 years back but never used it because of the loud noise. I fished out again during lockdown. Do I need to a) adjust the blades as shown 2) change the black adjustment screw 3) both. If I make it quiet by adjusting the screw, will that affect the cut? Thanks!
pokemon ruler
Nice video. Very easy to understand and helped in aligning the razor. Thanks
Thank you.
My wahl 2110 blade wont slide if I tighten the 2 screws pls help sir πͺπͺπͺπͺ
You didnβt show how to put the blades back on !!! F*** everybody who said this a good video βΌοΈπ―π―π― half ass tutorial
Thank you for uploading this tutorial ππΌ
Literally saved my clippers from being thrown out in frustration! With hairdressers closed in Melbourne under covid-19, I’ve become the family hair dresser. These are now going strong 17 years since purchase with no sharpening! 7 of those years were hopeless until I found your video ππ»
great, thanks
Many so-called "zero gap" videos on Youtube ignore aligning the leftmost teeth. Are these people ignorant, or do they just don’t care?
Very helpful video!!
Simplest and most useful Wahl razor adjusting video on youtube. Thanks!
Thank you for your great video. That helped me put my clippers back together after the screws fell out!
I dropped my clippers and they started having this really annoying noise. Just found out that it had messed up with the power setting when I dropped it. Thanks for the video!
Thanks man
Bahi mujey Model no send kaey
thanx’s a lot. your video makes my WAHL useful again
bravo!
Thx bro it really help me lot
Thanks, that power adjust was just what solved my issue.
Thank you!
hello, you have not shown how you tighten the screws, I think it is the most important, I have a wahl mower, the blades do not move and it makes a monster noise (even by adjusting the black screw), the blades do not want to move because I live too hard maybe, but if I do not screw enough, the upper blade moves. I do not understand . for a clipper at 100 euros, it hurts my heart, I cut my children’s hair for 6 months with a clipper at 8 euros which works perfectly and which does not require any adjustment
lol
This man saved me $40